Adjustment tool levelling platform
€59.00
Login
- Levelling adjustment aid for SetupWizzard weighing platforms
Advantages Levelling adjustment aid
Convenient levelling of the measuring platforms
The levelling adjustment aid was specially developed for the SetupWizzard measuring platforms. It makes aligning the platforms significantly easier and ensures convenient, precise adjustment of the platform height.
Depending on requirements, adjustment can be carried out directly by hand or with a suitable socket wrench – for maximum flexibility in everyday work. This allows the platforms to be quickly adapted to different floor conditions and operating requirements, without any loss of time in the measuring process.
Easy to use Levelling adjustment aid
Compatibility & Accessories Levelling adjustment aid
Simple application levelling adjustment aid
You might also like this
Calibration tool camber sensor
Defined reference for precise calibration of the camber sensor – guided via WizzardOS.
Caster and king pin angle measurement
For SetupWizzard BaseLine, ProLine & Digital: quickly determine caster and toe – guided by WizzardOS.
Digital camber sensor
Precise camber measurement magnetically attached to the setup wheel, transmitted via Bluetooth to WizzardOS.
Height measurement analog
Read off the ride height from 120 to 200 mm directly on the scale – without electronics, ready for use quickly.
Levelling sleeves - single notch
For SetupWizzard Basic & Pro: Improved visibility of the laser beam – level measuring platforms quickly and accurately.
Stand digital height measurement
Stand digital height measurement – compensate for unevenness with three feet.
Air jack extension long
More ground clearance and installation clearance for all SetupWizzard systems – universally compatible.
Air jack extension short
Extends the lifting height of the air lift system by 25 to 60 mm – compact and easy to position.
Camber measurement upgrade kit
Retrofit digital fall detection easily – flexibly with one or four sensors.
Caster and king pin angle measurement
For SetupWizzard Easy, Basic & Pro: measure caster and toe manually – directly on the scale of the tracking measurement module.
Charge cable for camber & height sensor
Charges fall and height sensors flexibly and independently of the flight case – compact for storage.
Digital height measurement
Measure ride height precisely to ±0.3 mm – digital display, via Bluetooth to WizzardOS.
Digital spirit level
Determine camber values quickly and precisely on the vehicle – direct display on the screen.
Extension Cable Toe Measurement
200 mm more range between the digital track gauge module and the measuring platform – easy to install.
Flightcase
Secure transport & ready-to-hand storage of the SetupWizzard system – with charging module.
Gauge ruler
Reliably determines the track width difference for an individually tailored setup.
Ground sockets
Fixed, precise positioning of measuring platforms, levelling lasers and height measuring modules.
Levelling laser
Level all four measuring platforms precisely – for a reliable, shared reference plane.
Levelling sleeves - three notches
Larger levelling sleeves for improved visibility of the laser beam and precise alignment.
Longer platform feet
Increase the levelling range of the measuring platform from 45 mm to up to 85 mm.
Manual camber gauge
Measure rim impact accurately – ideal for workshop, pit box and race team.
Measuring pin constant offset
Extends height measurement to include hard-to-reach measurement points – for analogue and digital.
Mirror caster measurement 10° steering angle
Precise optical reference for caster and kingpin inclination measurement – exactly at a 10° steering angle.
Overvoltage protection 230 V
Protects your SetupWizzard system reliably against overvoltages – even during generator operation.