Air jack extension short
25 mm
€55.00
Login
- 1 x air-lift riser, short version
Advantages Air-lift increase short
Details
The short air-lift extension significantly increases the lifting height of an air-lift system installed in the vehicle. This creates additional clearance for the convenient installation of the setup wheels and measuring platforms of the SetupWizzard system.
The extension is positioned centrally beneath the air-lift supports and enables easier lifting as well as significantly more convenient vehicle preparation. The short version with a length of 150 mm is particularly suitable for vehicles with low ground clearance – for a safe measurement setup even with challenging vehicle geometries.
Easy to use Air-lift increase short
Compatibility & Accessories Air-lift increase short
Frequently asked questions: short-term airlift increase
You might also like this
Calibration tool camber sensor
Defined reference for precise calibration of the camber sensor – guided via WizzardOS.
Caster and king pin angle measurement
For SetupWizzard BaseLine, ProLine & Digital: quickly determine caster and toe – guided by WizzardOS.
Digital camber sensor
Precise camber measurement magnetically attached to the setup wheel, transmitted via Bluetooth to WizzardOS.
Height measurement analog
Read off the ride height from 120 to 200 mm directly on the scale – without electronics, ready for use quickly.
Levelling sleeves - single notch
For SetupWizzard Basic & Pro: Improved visibility of the laser beam – level measuring platforms quickly and accurately.
Stand digital height measurement
Stand digital height measurement – compensate for unevenness with three feet.
Adjustment tool levelling platform
Convenient levelling of the measuring platforms – adjustable by hand or with a socket wrench.
Air jack extension long
More ground clearance and installation clearance for all SetupWizzard systems – universally compatible.
Camber measurement upgrade kit
Retrofit digital fall detection easily – flexibly with one or four sensors.
Caster and king pin angle measurement
For SetupWizzard Easy, Basic & Pro: measure caster and toe manually – directly on the scale of the tracking measurement module.
Charge cable for camber & height sensor
Charges fall and height sensors flexibly and independently of the flight case – compact for storage.
Digital height measurement
Measure ride height precisely to ±0.3 mm – digital display, via Bluetooth to WizzardOS.
Digital spirit level
Determine camber values quickly and precisely on the vehicle – direct display on the screen.
Extension Cable Toe Measurement
200 mm more range between the digital track gauge module and the measuring platform – easy to install.
Flightcase
Secure transport & ready-to-hand storage of the SetupWizzard system – with charging module.
Gauge ruler
Reliably determines the track width difference for an individually tailored setup.
Ground sockets
Fixed, precise positioning of measuring platforms, levelling lasers and height measuring modules.
Levelling laser
Level all four measuring platforms precisely – for a reliable, shared reference plane.
Levelling sleeves - three notches
Larger levelling sleeves for improved visibility of the laser beam and precise alignment.
Longer platform feet
Increase the levelling range of the measuring platform from 45 mm to up to 85 mm.
Manual camber gauge
Measure rim impact accurately – ideal for workshop, pit box and race team.
Measuring pin constant offset
Extends height measurement to include hard-to-reach measurement points – for analogue and digital.
Mirror caster measurement 10° steering angle
Precise optical reference for caster and kingpin inclination measurement – exactly at a 10° steering angle.
Overvoltage protection 230 V
Protects your SetupWizzard system reliably against overvoltages – even during generator operation.